Advertisement
Quick Links
Advertisement
Related Manuals for Legacy LADDER BARREL
Summary of Contents for Legacy LADDER BARREL
- Page 1 LADDER BARREL ASSEMBLY INSTRUCTIONS...
- Page 2 What Comes in the Box A- LADDER B- BARREL C- LADDER BARREL POLE D- SILICONE END CAPS X 2 E- UPHOLSTERED PLATFORM (OPTIONAL) F- BLACK KNOBS X 4 G- SCREWS X 2 STEP 1 - Remove Contents from Box Place the long-side box down. Use the scissors to carefully...
- Page 3 STEP 2 - Place the Top Pole on the Ladder Locate the top pole. Insert the pole through the top two holes of the ladder (1). Then align the holes of the top pole with the holes of the ladder. Locate the 2 screws attached to the pole and use the Phillips screwdriver to carefully tighten the two screws to fix the top pole to the ladder.
- Page 4 To adjust the barrel: Move the barrel using the bottom (near the knobs) not the top of the barrel to adjust. STEP 4 - Prep for Use Prior to using, make sure the ladder is the preferred distance away from the barrel and all the black knobs are fully tightened.