Applications - Axis P14 Series User Manual

AXIS P14 Network Camera Series
Configure your device
6. Select a camera and a stream profile.
7. Set the prebuffer time to 5 seconds.
8. Set the postbuffer time to 1 minute.
9. Click Save.

Applications

Applications
With applications, you can get more out of your Axis device. AXIS Camera Application Platform (ACAP) is an open platform that
makes it possible for third parties to develop analytics and other applications for Axis devices. Applications can be preinstalled on the
device, available for download for free, or for a license fee.
To find the user manuals for Axis applications, go to help.axis.com.
Note
• Several applications can run at the same time but some applications might not be compatible with each other. Certain
combinations of applications might require too much processing power or memory resources when run in parallel. Verify
that the applications work together before deployment.
AXIS People Counter
AXIS People Counter is an analytic application that you can install on a network camera. You can use the application to count how
many people pass through an entrance, in what direction they pass, and if more than one person passes during a predefined interval.
You can also use it to estimate how many people are currently occupying an area, and the average visiting time.
The application runs embedded in the camera which means you don't need a dedicated computer to run the application.
AXIS People Counter is suitable for any indoor environment, like stores, libraries, or gyms.
How does estimating occupancy work?
You can use the application to estimate occupancy in areas with one or several entrances and exits. Each entrance and exit needs to be
equipped with a network camera with AXIS People Counter installed. If there are several cameras, they communicate with each other
over the network in a primary and secondary concept. The primary camera continuously fetches data from the secondary cameras and
presents the data in the live view. Every fifteen minutes, the primary camera sends the statistical data to AXIS Store Data Manager.
Consequently, the reports generated from AXIS Store Data Manager can present the data in a minimum of 15 minutes time interval.
18