Operation - Hyundai HBAC20V2A Original Instructions Manual

1. Male hex drive
2. Forward/reverse selector
3. Handle
4. Handle strap
5. Belt clip
6. Battery
7. Battery release button
3.2 PACKAGE CONTENT LIST
1x Cordless impact wrench 20V
1x 2000mAh battery
1x Battery charger
1x Instruction manual
Carefully remove the impact wrench and any accessories from the box. Make sure that all items listed in the
contents are included.
Inspect the impact wrench carefully to make sure no breakage or damage occurred during shipping.
Do not discard the packaging material until you have carefully inspected and satisfactorily operated the drill
and impact wrench. If possible, store the packaging until the warranty period has expired

4. OPERATION

4.1 CHARGING THE BATTERY PACK
IMPORTANT: The battery pack is not fully charged at the factory. Before attempting to charge
them, thoroughly read all of the safety instructions.
Assure that the charger you use are applicable to the battery pack.

Insert the charger into 220-240V~, 50-60Hz outlet. The indicator light (13) will turn red to show the

power is connected.
Insert the battery (6) into the slot of charger (10). Make sure the contact with the charger is correct.

The indicator light (13) turn to green and flash when charging.

When fully charged, the indicator light (13) turn to green.

Frequently monitor the charger and battery pack while connected.

Unplug the charger and disconnect it from the battery pack when finished.

Allow the battery pack to cool completely before using it.

Store the charger and battery pack indoors, out of reach of children.

NOTE: If the battery does not fit properly, disconnect it and confirm that the battery pack is the
correct model for this charger as shown on the specification chart. Do not charge any other battery
pack or any battery pack that does not securely fit the charger.
NOTE: If battery is hot after continuous use in the tool, allow it to cool down to room
temperature before charging. This will extend the life of your batteries.
NOTE: Using your thumb or fingers to press the battery's release button in and pull the
battery pack off at the same time.
8. LED work light
9. Variable speed on/off trigger
10. Battery charger
11. Battery capacity indicator
12. Button for battery capacity indicator
13. Indicator light on charger
08