Hartman Apollo 63401006 Assembly Instructions

PLEASE KEEP ME WITH YOUR PROOF OF PURCHASE FOR FUTURE REFERENCE.

ATTENTION:

1. Please read these instructions carefully before assembly
2. Aluminium is soft metal and over tightening may strip thread or break the part
3. DO NOT use power tools however you will require an allen key to assemble product.
4. Please allow 30 minutes for assembly.
5. Although assembly only requires 1 person it is advised that a second person be present to help turn the chair over and into position when
fully assembled.

ASSEMBLY STEPS:

1. Remove glass and safely set aside.
2. On a soft clean surface, lay the table top(A) upside down and attach each leg(C) using bolt (D), Flat Washer
(E), lock washer (F).
3. Gently tighten all bolts in turn, do not over tighten.
4. Turn table back over, screw Adjustable feet (H) and place where required.
5. Carefully place glass（B） onto the top and lightly press onto suckers to secure.
For more information regarding maintenance of your furniture and to register your warranty,
please visit www.hartmanuk.com
.

Parts List

Parts Picture
A
B
C
For replacement or lost spare parts please go to
Should you have any queries about your furniture your first point of contact should be the retailer from whom
you purchased your product.
Component's
Description QTY
Table top 1
GlassTop 1
Leg 4
Part no Parts list
63401006A
63707007A D
63401006A
E
63707007B
63401006C
F
63707007C
H
http://faq.hartmanuk.co.uk/spares/
Fixings
Parts Picture Description
M8*30Bolt
(M8*30)
Flat Washer
（ M8 ）
Lock
Washer
（ M8 ）
Adjustable
feet
(M8*20)
QTY Part no.
8 2002191
8 1001162
8 1002162
4 2002198