Table of Contents
Advertisement
en Cleaning and servicing
15.2 Changing the basic set-
tings
Set the programme selector to po-
1.
sition 1.
Press Iron Dry and, at the same
2.
time, turn the programme selector
to position 2.
a The display shows the current
value.
Set the programme selector to the
3.
required position.
→ "Overview of the basic settings",
Page 33
To change the value, press Ready
4.
In .
To save the changes, switch off
5.
the appliance.
16 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
16.1 Tips on cleaning and
care
Wipe down the
housing and the
controls with
34
This ensures the
parts of the appli-
ance will remain
clean and hy-
gienic.
nothing but water
and a damp
cloth.
Remove all de-
tergent residue,
spray residue or
other residues
immediately.
Leave the appli-
ance door open
after use.
16.2 Base unit
The base unit is the accessible area
at the bottom of the appliance in
which you will find the heat ex-
changer.
Opening the base unit
Requirements
¡ The appliance has cooled down
for 30 minutes.
¡ The appliance door is closed.
Open the maintenance flap.
1.
If you place a cloth beneath the
maintenance flap, you can collect
the remaining water from the base
unit.
Fresh deposits
are easier to re-
move without
leaving any
residue.
This allows the
residual water to
dry, reducing
odours in the ap-
pliance.
Advertisement
Table of Contents
