Cancelling The Programme; Unloading The Laundry; Switching Off The Appliance; Fluff Filter - Siemens WP31G200IN User Manual

en operation
The cooling process starts auto-
matically after approximately 30
seconds and cools down the laun-
dry while the drum is rotating. If
you want to avoid or cancel the
cooling process, open the door.
→ "Display", Page 18
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press Start/Pause .
5.
12.6 Cancelling the pro-
gramme
Press Start/Pause .
1.
Open the door.
2.
Remove the laundry.
3.
→ "Unloading the laundry",
Page 28
12.7 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
12.8 Switching off the appli-
ance
Turn the programme selector to
▶
⁠ .
12.9 Fluff filter
During drying, fluff from the laundry is
collected in the fluff filter. The fluff fil-
ter protects the appliance from fluff.
Cleaning the fluff filter
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
clean the fluff filter.
Note: If you do not clean the appli-
ance as described, the appliance's
functionality may be impaired.
28
Requirements
¡ The display shows the following
after drying: "End"
¡ or the display shows the following
during operation: ⁠ .
Open the door.
1.
Remove the fluff from the door.
2.
Remove the fluff filter.
3.
Remove the fluff from the recess.
4.
Ensure that no fluff falls into the air
channel.