Table of Contents
Advertisement
3-14 Replacing the Power Supply
Before you remove or install the system cover
• Make sure the system is not turned on or connected to AC power.
Follow these instructions to replace the power supply:
1.
Remove the four screws securing on the power supply.
2.
Pull up the power supply handle and press the retaining clip on the right side of the power supply
along the direction of the arrow. At the same time, pull out the power supply by using its handle.
3.
Insert the replacement power supply firmly into the chassis. Connect the AC power cord to the
replacement power supply.
Secondary
PSU
Primary
PSU
3
Hardware Installation
1
- 34 -
2
Advertisement
Table of Contents
