Gigabyte H261-H60 User Manual page 13

LAN
Ser ver
Oper ating P r oper t i es
Power Suppl y
Video
Socket Secur i t y Ser ver
Oper ating P
Storage
Socket
RAID
Expansion Slot
Socket
Internal I/O
Socket Secur i t y Ser ver Oper ating P r oper t i es
Power Suppl y
Per node:
1 x Dedicated management port
Š
Total:
4 x Dedicated management ports
Š
1 x 10/100/1000 *CMC global management port
Š
*CMC: Chassis Management Controller, to monitor all status of computing nodes
* Please contact FAE if NCSI function of OCP mezzanine card is needed
Integrated in Aspeed® AST2500
Š
2D Video Graphic Adapter with PCIe bus interface
Š
1920x1200@60Hz 32bpp, DDR4 SDRAM
Š
Management chip in CMC board:
Š
Integrated in Aspeed® AST1250
Š
r oper t i es
Integrated in Aspeed® AST2520A2-GP
Š
Per node:
Power Suppl y
3 x 3.5" SATA/SAS hot-swappable HDD/SSD bays
Š
Onboard SATA DOM support (PIN_7, PIN_8 or external cable)
Š
Secur i t y Ser ver
Oper ating P r oper t i es
Total:
12 x 3.5" SATA/SAS hot-swappable HDD/SSD bays
Š
Power Suppl y
2.5" HDD/SSD supported
Š
SAS card is required for SAS devices support
Š
Intel® SATA RAID 0/1/5
Š
Per node:
1 x Half-length low-profile slot with PCIe x16 (Gen3 x16 bus)
Š
1 x Half-length low-profile slot with PCIe x8 (Gen3 x8 bus)
Š
Secur i t y Ser ver Oper ating P r oper t i es
1 x OCP mezzanine slot with PCIe Gen3 x16 bus
Š
Secur i t y Ser ver
Socket Oper ating P r oper t i es
Power Suppl y
Total:
Power Suppl y
4 x Half-length low-profile slot with PCIe x16 (Gen3 x16 bus)
Š
4 x Half-length low-profile slot with PCIe x8 (Gen3 x8 bus)
Š
4 x OCP mezzanine slot with PCIe Gen3 x16 bus
Š
Per node:
1 x COM header
Š
1 x COM header
Š
1 x TPM header
Š
1 x BMC SGPIO header
Š
1 x JTAG BMC header
Š
1 x PLD header
Š
1 x Clear CMOS jumper
Š
1 x IPMB connector
Š
1 x Buzzer
Š
- 13 - Hardware Installation