Ptz Drivers; Aptp; Pelco - Axis Q1615 Mk III User Manual

AXIS Q1615 Mk III Network Camera

PTZ drivers

PTZ drivers

APTP

This is a list of models supported by this driver. The physical installation depends on your Axis product and the PTZ unit.
Important
Check what serial communication your Axis product and the PTZ unit will support.
Supported models with RS485 2-wire interface:
• AXIS T99A Positioning Unit Series.
For information about compatible Axis products, see axis.com.
Other models may be supported but this has not been verified by Axis.
Technical information
DEFAULT capabilities for PTZ driver:
Driver
Version
DEFAULT serial configuration:
PortMode
BaudRate
DataBits
StopBits
Parity
DEFAULT supported capabilities in this PTZ driver:
Note
Different PTZ units may have other capabilities (both less and more).
Movement
Pan
Tilt
Connection
For the RS485/RS422 pin assignment on your device, see RS485/RS422 connector on page 50.
To change serial port settings, go to System > Plain config > Serial in the device's web interface.

Pelco

This is a list of models supported by this driver. The physical installation depends on your Axis product and the PTZ unit.
Important
Check what serial communication your Axis product and the PTZ unit will support.
Absolute
yes
yes
APTP
1.1.0
RS485
115200
8
1
None
Relative
yes
yes
56
Continuous
yes
yes