Programing Mode - Collect Mode - LG RN1840 Series Owner's Manual

Programing Mode – Collect Mode
Collect Information Data :
The dryer collects the usage data so that the owner can check various information like number of various cycles
used, how many times card or coins used, etc.
How to enter Programming mode:
- Coin type – Turn on/off the toggle switch.
- Card type – Insert the service card.
- All types –
1) Press the 1st & 3rd button at the same time.
2) Press the 2nd & 3rd buttons to toggle numbers.
Then, press the 4th button to move to the next digit.
3) Press the Start button to finish password input.
Collect Mode
Enter SVC Mode
Press 1st button
Press 2nd button or 3rd button
Press Start button
Select the category you want
Button functions :
Start button = Select
1st button = Go back a step
2nd button = Move up
3rd button = Move down
(display)
Collect Mode
Until display shows
Refer to the follow Collect Mode Data List
PROGRAMMING MODE
<Control Panel >
1st
2nd
3rd
4th
Start
57
Display