38
PROGRAMMING MODE
10.
Top Off Time Setup
Top Off Time Setup can be used to set the add time for each course.
Enter SVC Mode
Press 1st button
Press 2nd button
Press Start button
Press 2nd button or 3rd button
Press Start button
Select the time you want
Button functions :
Start button = Select
1st button = Go back a step
2nd button = Move up or Increase value
3rd button = Move down or Decrease value
Press Start to set the time
NOTE
• Range : 1~99 min
• Increments : 1
• COS1 : High Temp
• COS2 : Med Temp
• COS3 : Low Temp
• COS4 : No Heat
Top Off Time Setup
Until display shows
The next course setting will be displayed.
Display