Care And Cleaning - Osterizer BLSTBG4127B Instruction Manual

TOGGLE MODELS
1. Push switch up and blend ingredients to desired consistency.
2. Push switch to the off "O" position to stop the blender and turn blender off.
3. To use PULSE, push switch down for desired length of time.
4. Release PULSE and allow blade to stop. Repeat cycle as desired.
NOTE: A cycle consists of operating the blender for about two seconds and then allowing the
blades to coast to a stop.

CARE AND CLEANING

CLEANING
The blade is sharp! Carefully remove the blade from the bottom of the
jar by turning the interlock blade assembly counterclockwise. The filler
cap, lid, jar, and blade assembly are suitable for use in the dishwasher.
Use the top rack of the dishwasher for the filler cap, lid and interlock
blade assembly.
You can also wash the parts with warm water and detergent. Rinse and
dry thoroughly. Clean the base with a soft, damp cloth. Never immerse
the motor base in liquid.
Check that the parts are not damaged before replacing them.
TIP: Run the blender with soapy water for 20 to 30 seconds to clean the glass jar. Then rinse
with clean water.
E ng li s h - 7