Table of Contents
Advertisement
INSTALLATION
Unpack your ceiling fan carefully, remove all parts and components, and lay on a cloth or
soft surface to avoid damage. Do not lay the motor housing on its side, the housing may get
damaged. Before commencing installation, check that all parts are included.
Warning: All electrical tasks should only be undertaken after disconnection of electricity by
removing fuses or turning off the circuit breaker to avoid the risk of electric shock.
Installation of The Mounting Bracket
The hanger bracket must be screwed on to a firm, flat surface. The structure to which it is
installed must be able to withstand ten times the static weight of the fan.
Wooden surface:
1.
If installing the ceiling fan into a wooden ceiling or joist, attach the mounting
bracket using the 4 supplied self-tapping screws. Note: Self-tapping screws are
only suitable for wooden ceilings.
2.
Ensure the mounting bracket is properly secured to prevent the fan from falling.
3.
Loosen the two canopy screws from the mounting bracket.
Self-tapping
screws
Mounting
bracket
6
Mounting
bracket
Advertisement
Table of Contents
