Safety And Warnings - Kogan KA52DCCFLRS User Manual

SAFETY AND WARNINGS

IMPORTANT: For your safety, this product must be installed by a licensed electrical
contractor.
• Make sure that the mains voltage matches the voltage stated on the rating label of the
appliance.
• Check the power cord regularly for visible damage. If the cord is damaged, cease use
immediately and contact help.Kogan.com for support, in order to avoid danger.
WARNING: Do not use the appliance if its cord, plug, or housing is damaged, or if it
malfunctions or has been dropped or damaged in any way.
• Do not use the appliance in confined spaces with explosive or toxic vapours.
• The appliance is not intended to be used by children under the age of 8. It can be used
by children over the age of 8, if they are given continuous supervision.
• This appliance is not intended to be used by persons with reduced physical, sensory, or
mental capabilities, or lack of experience or knowledge, unless they have been given
supervision or instruction concerning the use of the appliance in a safe way by a person
responsible for their safety, and understand the hazards involved.
• Supervise young children to make sure that they do not play with the appliance. Close
supervision is necessary when the appliance is being used by or near children.
• Keep the appliance and its cord out of reach of children under the age of 8.
• Do not try to repair the appliance yourself. Contact help.Kogan.com for support.
• Cleaning and maintenance must be carried out according to this user guide to make
sure the appliance functions properly. Always turn off and unplug the appliance before
cleaning.
• Cleaning and maintenance tasks must not be carried out by children.
• Make sure the fan is not placed near drapes, curtains, or any object that may be drawn
into the fan.
• Never attach the fan to a power point, but to the ceiling itself.
• The minimum distance between the fan blades and the floor must be 2.1m. The
minimum carrying capacity of the outlet box from which the fan is hung must be 45kg.
• Make sure you install an all-poles disconnection switch with a minimum distance of
3mm between poles in the supply wiring to the ceiling fan.
• Make sure the installation site will not allow the rotating fan blades to contact any
objects and that there is a minimum distance of 150mm (6") from the blade tip to the
wall or ceiling. Please note that the bigger this distance is, the more airflow the fan will
produce.
3