Advertisement

Installation Manual
Jetstream
/Jetstream
DF
®
®
Dear customer,
Thank you for placing your trust in us by
purchasing this product. Please read these
instructions carefully and completely before
deciding whether you would like to do the
installation yourself or have it done by a
specialist.
Legal Note: Jetstream®/ Jetstream® DF
All Jetstream® are permitted by the ECE regulation
for motorcycles licensed for road use by EU law
as documented on the certification number em-
bossed on each lens. This means that you may
use two Jetstream® units instead of the original
indicator lights without any additional entries in
your motorcycle documents or presentation to a
motorcycle inspection organization in Germany,
or equivalent in other EU member states. You
do not need to carry any special documenta-
tion. This applies to all motorcycles licensed
under EU law and the corresponding lights.
ATTENTION! The warranty will not apply if
the Jetstream® has not been correctly installed
or connected to the electrical supply on your
motorcycle. Do not carry out the installation un-
less you are qualified to do so; otherwise, leave
the installation and connection work for your
Jetstream® to a qualified repair shop. The war-
ranty does not apply to damage due to wrong
connection or excess voltage (such as due to a
defective alternator regulator).
ATTENTION! Improper mechanical installation
or orientation of your Jetstream® lights may in-
validate your motorcycle's roadworthiness and
insurance protection, or even lead to accidents.
Before every usage of your motorcycle, check
whether the indicators are correctly mounted
and fully functional.
page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Jetstream and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for kellermann Jetstream

  • Page 1 Legal Note: Jetstream®/ Jetstream® DF All Jetstream® are permitted by the ECE regulation for motorcycles licensed for road use by EU law as documented on the certification number em- bossed on each lens. This means that you may use two Jetstream®...
  • Page 2 ATTENTION! Your Jetstream® lights may heat up during use. Contact with bare skin or heat- sensitive objects may lead to damage or injury. ATTENTION! Each Jetstream® is fitted with a vibration-absorbing, elastic fastening arm (silent rubber adapter). This wearing part is designed to protect your Jetstream®...
  • Page 3 Jetstream® in place of the original indicators, or drill a max. 8.5 mm diameter hole and fasten the Jetstream® at 8 Nm with the self-locking M8 nut supplied. Make sure that the surface under your Jetstream® where the wires will emerge is pro- tected from splash water.
  • Page 4 Dismantle the original indicators, rear and brake light. Mount the Jetstream® DF in place of the ori- ginal indicators, or drill a max. 8.5 mm diameter hole and fasten the Jetstream® DF at 8 Nm with the self-locking M8 nut supplied.
  • Page 5 Lay the cables in a way, that they are protected from splash water and fasten them, e.g. by using zip ties. Now test the function of the Jetstream®. This completes the installation. page 4...
  • Page 6 Lay the cables in a way, that they are protected from splash water and fasten them, e.g. by using zip ties. Now test the function of the Jetstream® DF. This completes the installation. page 4...
  • Page 7 (info@kel- lermann-online.com) or call us: +49 (0)241/93 80 8-0. We are happy to assist you. The Kellermann Jetstream® is equipped with the tried-and-trusted Long Life Protection Guard® circuit, which ensures extremely long life with LED technology. It is not necessary to replace the illu- minate and, due to the laws for device approval, it is not allowed.

This manual is also suitable for:

Jetstream df

Table of Contents