Table of Contents
Advertisement
_________________________________________________________________________________________________
passphrase.
Set the device's maximum
transmission power output.
Enable and disable the
device's wireless interface.
Set the device's transmission
chain parameters.
Enable and disable
Promiscuous Mode (backwards
compatibility with legacy
Fluidmesh units).
Set the device's transmission
chain parameters.
Enable and disable reduction of
false positive results during
dynamic frequency selection
(DFS) if the device is being
operated in the UNII2
frequency band.
Set the wireless multimedia
(WMM) queue configuration
string.
__________________________________________________________________________
© 2021 Cisco and/or its affiliates.
D
wireless txpower E
wireless interface
G
wireless txchain H
wireless promisc F
wireless maxmcx H
wireless dfs
[reduce-false-
positives K]
wireless wmm N
All rights reserved
Command-line interface user manual
passphrase.
Parameter E is the maximum
transmission power level in
dBm.
This parameter must be
expressed as an unsigned
integer between 0 and 36.
Alternatively, enable automatic
transmission-power selection
wireless
by entering
txpower
AUTO. Note that
AUTO must be entered in
capitals.
Possible parameters for G are
enable and disable.
Possible parameters for H are
first (transmission chain 1
only), second (transmission
chain 2 only) or both.
Possible parameters for F are
enable (enable full backwards
compatibility) and disable
(maintain compatibility with
newer devices only).
Possible parameters for H are
first (transmission chain 1
only), second (transmission
chain 2 only) or both.
Possible parameters for K are
enable and disable.
N is the WMM configuration
string. This string takes the
following form:
[bk|be|vi|vo] aifs A cwmin B
cwmax C txop D ampdu E
In the string above,
[bk|be|vi|vo] represents the
class-of-service (CoS)
parameters.
• bk is the CoS background
queue parameter.
• be is the CoS best-effort
queue parameter.
• vi is the CoS video queue
parameter.
• vo is the CoS voice queue
parameter.
In the string above:
• A is the arbitration inter-
frame spacing value.
• B is the minimum
Page 16 of 37
Advertisement
Table of Contents
