Table of Contents
Advertisement
8. Insert a straightened paper clip into the emergency-eject hole
so that the tray slides out of the optical drive. Then, remove the optical drive bezel from the optical
drive as shown.
Figure 16. Removing the optical drive bezel from the optical drive
9. Insert the tab
1
on the optical drive bezel into the corresponding hole in the new optical drive. Then,
insert the other three tabs
forward to close the tray.
Figure 17. Installing the optical drive bezel to the optical drive
10. Flex the optical drive bracket and insert the two pins on the bracket into the corresponding holes in the
optical drive. Then, pivot the optical drive downward until it snaps into position.
Figure 18. Installing the optical drive into the bracket
58
ThinkCentre M700 User Guide
2
into the corresponding holes in the optical drive. Gently push the tray
1
adjacent to the eject/close button
Advertisement
Table of Contents
