Insertion Of Batteries - LaserLiner RangeXtender 60 Manual

Insertion of batteries

1
Open the battery compartment (11)
and insert batteries according to the
symbols. Be sure to pay attention
to polarity.
Working with the laser receiver RX
2
Use the RX laser receiver for levelling over great distances or in very bright
conditions. Switch it on with button 8.
Set the line laser to hand receiver mode. The laser lines will now pulsate
with high frequency, making the laser lines darker. The laser receiver can
detect these pulsating laser lines up to a maximum distance of 60 m.
Now move the receive field (3) on the laser receiver up and down through the
laser lines until the middle LED lights up. Now mark the reference dimension.
!
Pay attention that the laser lines are not reflected by reflective surfaces.
Such reflections can lead to false indications.
RX 60
Rapid beeping
(bottom LED)
40 mm
Laser
Continuous tone
(middle LED)
= mark the reference
RangeXtender 60
–
RX 60
RX 60
Slow beeping
(top LED)
EN
09