Technical Data; Dimensions; Graco Phone Numbers; The Graco Warranty And Disclaimers - Graco 231-043 Instructions-Parts List Manual

TECHNICAL DATA

Power Requirements . . . . . . . . . . . . . . . . . . .
1 phase, 15 amp minimum or 3500 Watt generator
Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Working Pressure Range . . . . . . . . .
Cycles/Gallon (liter) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum Delivery . . . . . . . . . . . . . . . .
Tip Size . . . . . . . . . . . . . . . one gun – 0.031; two guns – 0.019
Power Cord . . . . . . . . . . . . . .
Inlet Paint Strainer . . . . . . . . . . . . . . . .
Outlet Paint Filter . . . . . . . . . . . . . . . . . .
Pump Inlet Size . . . . . . . . . . .
Fluid Outlet Size . . . . . . . . . . . . . . . .
Wetted Parts:
Displacement Pump . . . . . . . .
Packing Material . . . . . . . . . .
Filter . . . . . . . . . . . Aluminum, Carbon steel, Stainless Steel
60 mesh (250 micron reusable SST screen
NOTE: Delrin

THE GRACO WARRANTY AND DISCLAIMERS

WARRANTY
Graco warrants all equipment manufactured by it and bearing its name to be free from defects in material and workman-
ship on the date of sale by an authorized Graco distributor to the original purchaser for use. As purchaser's sole remedy
for breach of this warranty, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the
equipment proven defective, with the exception of defects in parts on the drive train/gear box on EM and GM sprayers or
power train on EH & GH sprayers, which will be repaired or replaced for twenty–four months from the date of sale for
Gas–Hydraulic (GH) and Gas Mechanical (GM) sprayers and for thirty–six months from the date of sale for Electric–Me-
chanical (EM) and Electric–Hydraulic (EH) Sprayers. This warranty applies only when the equipment is installed, oper-
ated and maintained in accordance with Graco's written recommendations.
This warranty does not cover, and Graco shall not be liable for, any malfunction, damage or wear caused by faulty installa-
tion, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or sub-
stitution of non–Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incom-
patibility with Graco equipment of structures, accessories, equipment or materials not supplied by Graco, or the improper
design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not sup-
plied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco
distributor for verification of the claim. If the claimed defect is verified, Graco will repair or replace free of charge any defec-
tive parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment
does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges
may include the costs of parts, labor and transportation.
DISCLAIMERS AND LIMITATIONS
THE TERMS OF THIS WARRANTY CONSTITUTE PURCHASER'S SOLE AND EXCLUSIVE REMEDY AND ARE IN LIEU OF ANY
OTHER WARRANTIES (EXPRESS OR IMPLIED), INCLUDING WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS
FOR A PARTICULAR PURPOSE, AND OF ANY NON–CONTRACTUAL LIABILITIES, INCLUDING PRODUCT LIABILITIES, BASED
ON NEGLIGENCE OR STRICT LIABILITY. EVERY FORM OF LIABILITY FOR DIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES
OR LOSS IS EXPRESSLY EXCLUDED AND DENIED. IN NO CASE SHALL GRACO'S LIABILITY EXCEED THE AMOUNT OF THE
PURCHASE PRICE. ANY ACTION FOR BREACH OF WARRANTY MUST BE BROUGHT WITHIN TWO (2) YEARS OF THE DATE OF
SALE.
EQUIPMENT NOT COVERED BY GRACO WARRANTY
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, WITH RESPECT TO ACCESSORIES, EQUIPMENT, MATERIALS, OR COMPONENTS SOLD BUT NOT
MANUFACTURED BY GRACO.
etc.) are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in
making any claim for breach of these warranties.
Factory Branches: Atlanta, Dallas, Detroit, Los Angeles, West Caldwell (N.J.)
Subsidiary and Affiliate Companies: Canada, England, Switzerland, France, Germany, Hong Kong, Japan, Korea
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
120 VAC, 60Hz,
1 HP, DC
0–3000 psi (0 – 210 bar)
200 (53)
1.0 GPM (3.8 liter/min)
(with latex at 2000 psi (138 bar)
No. 14 AWG, 3 wire, 8'6" (2.6 m)
16 mesh (1190 micron)
Stainless Steel Screen, reusable
60 mesh (250 micron)
Stainless Steel Screen, reusable
3/4 npt(m) with 30 ID chamfer
1/4 npsm from fluid filter
Carbon steel, Polyurethane,
Delrin
Leather, UHMW polyethylene
These items sold, but not manufactured by Graco (such as electric motor, switches, hose,
PRINTED IN U.S.A. 307–785 7–86 Revised 7–92

DIMENSIONS

Weight (dry w/o packaging)
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

GRACO PHONE NUMBERS

TO PLACE AN ORDER , contact your Graco distributor,
or call this number to identify the distributor closest to
you: 1–800–328–0211 Toll Free.
FOR TECHNICAL ASSIST
information or assistance regarding the application of
Graco equipment: 1–800–543–0339 Toll Free
. . . . . . . . . . . . . . . . . 95 lb (43 Kg)
28 in. (711 mm)
26 in. (660 mm)
22.5 in. (572 mm)
ANCE, service repair