Honda CBF150 2002 Manual page 32

FRAME/BODY PANELS/EXHAUST SYSTEM
SERVICE INFORMATION
GENERAL
• This section covers removal and installation of the body panels, fuel tank and exhaust system.
• Always replace the exhaust pipe gaskets after removing the exhaust pipe from the engine.
• When installing the exhaust system, loosely install all fasteners, tighten the exhaust pipe joint nuts first, tighten the
muffler band bolt, then tighten the muffler mounting bolts.
• Always inspect the exhaust system for leaks after installation.
TORQUE VALUES
Exhaust pipe stud bolt
TROUBLESHOOTING
Excessive exhaust noise
• Broken exhaust system
• Exhaust gas leak
Poor performance
• Deformed exhaust system
• Exhaust gas leak
• Clogged muffler
2-2
11 N·m (1.1 kgf·m, 8 lbf·ft) See page 2-10