1 Safety Instructions When using electrical appliances, basic safety precautions should always be followed, including the following: Carefully read this instruction manual before using the appliance and USB cable. Keep the appliance, accessories and USB cable out of reach of young children. •...
Page 5
• Inspect the USB cable, Appliance and accessories for damage before every use. Do not use the appliance if it has been dropped or if any part of the Appliance, • accessories and/or the USB cable has been damaged. If the USB cable is damaged, call our customer service for a replacement. •...
Page 6
No liability can be accepted for any damage caused by non-compliance with these • instructions or any other improper use or mishandling of the Appliance, charging base and/or USB cable. This product has not been designed for any uses other than those specified in this •...
3 Display Description The Display which is located in the handle front will display vital information as shown: 1. Charge Remaining / Charging Level in %. Refer to the section “Charging the Appliance” for more information. 2. Battery Status Indicator. Refer to the section “Charging the Appliance” for more information.
4 Charging the Appliance Read the Safety Instruction first. IMPORTANT: This Appliance contains a built-in lithium-ion battery which must only be charged using the supplied USB cable. Always switch off and unplug the USB cable when charging is completed or when not in use.
Page 10
• A Red Battery Symbol in the Clipper’s display will illuminate indicating the battery on charge and the percentage number segments will scroll as well as show the percentage of charge. • When fully charged, the percentage will show “100”. •...
5 Operation 5.1 Attaching the Height Combs The Pet Hair Cordless Clippers are supplied with various height comb attachments for varying the trim height. The Height Combs are of different thicknesses so that you can choose the hair length as required. •...
5.2.2 Turbo To increase the speed, press the “T” button to enter “Turbo” mode. The Letter “T” will illuminate on the display indicating you are in Turbo mode. Press this button again to exit Turbo mode back to the default speed. 5.2.3 Blade Fine Adjustment The Blade height can be finely adjusted by rotating the Adjustment knob on the end of the Clipper Handle from 0.8mm to 2mm.
6 Electronic Lock The Clipper has an electronic Lock function to prevent the clipper from turning on accidentally should the On / Off button be pressed. To set the lock, with the clipper in either sleep mode or while in use, press and hold the On / Off button for between 3 –...
To replace, align the back of the blade assembly with the opening, swing closed and push in all the way until it locks in place. 8 Care and Cleaning 8.1 Cleaning the Clipper To ensure optimal trimming efficiency, the Clipper must be cleaned regularly. IMPORTANT: Do Not use flammable liquids, chemicals, abrasive creams, steel wool or scouring pads for cleaning.
9 Storage • Switch off and unplug the appliance. • Coil the USB cable loosely. Do not kink or pull the cable tight. • Ensure all parts are completely dry. • Store your appliance and accessories in a cool, dry location 10 Technical Specifications Input: 5Vd.c.
11 Warranty 12 Month Warranty Thank you for your purchase from Kmart. Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided.
Need help?
Do you have a question about the MR-889B and is the answer not in the manual?
Questions and answers