Related Manuals for anko RMT-668
Summary of Contents for anko RMT-668
- Page 1 Hair Clipper User Manual Model No.: RMT-668 Rev 1 Note: The specifications and/or components of this appliance are subject to change without prior notice.
-
Page 2: Table Of Contents
1 Safety Instructions ................. 3 2 Components ................... 6 3 Instructions for Use ............... 7 3.1 Charging the Appliance .................. 7 4 Operation ..................8 4.1 Attaching the Height Combs ................8 4.2 To use the Clipper ................... 8 5 Blade Removal ................9 6 Care and Cleaning ................ -
Page 3: Safety Instructions
1 Safety Instructions When using electrical appliances, basic safety precautions should always be followed, including the following: Carefully read this instruction manual before using the appliance and USB cable. • Keep the appliance, accessories and USB cable out of reach of young children. •... - Page 4 • Inspect the USB cable, Appliance and accessories for damage before every use. • Do not use the appliance if it has been dropped or any part of the Appliance, accessories and/or the USB cable has been damaged. • If the USB cable is damaged, call our customer service for a replacement. •...
- Page 5 • No liability can be accepted for any damage caused by non-compliance with these instructions or any other improper use or mishandling of the Appliance, charging base and/or USB cable. • This product has not been designed for any uses other than those specified in this manual.
-
Page 6: Components
2 Components Hair Clipper On / Off Slide Switch Height Combs Oil Bottle Charging port USB Cable Charging indicator Light Cleaning Brush Page 6 of 12... -
Page 7: Instructions For Use
3 Instructions for Use 3.1 Charging the Appliance Read the Safety Instruction first. IMPORTANT: This Appliance contains a built-in lithium-ion battery which must only be charged using the supplied USB cable. Always switch off and unplug the USB cable when charging is completed or when not in use. -
Page 8: Operation
4 Operation 4.1 Attaching the Height Combs The Hair Clipper is supplied with various height comb attachments for varying the trim height. These combs can be used for trimming sideburns, moustaches, beards, eyebrows, neck hair, etc. The Height Combs are of different thicknesses so that you can choose the hair length as required. -
Page 9: Blade Removal
5 Blade Removal • The Blade assembly can be removed for deep cleaning or for replacing a worn blade. To remove, press the side buttons inward, and at the same time, slide the blade assembly forward and out To replace, align the blade assembly with the opening and push in all the way until it locks in place. -
Page 10: Lubrication
6.3 Lubrication The Hair Clipper will need periodic lubrication to allow the blades to run smoothly. Use a drop of sewing machine oil every few months of use directly onto the trimming blades. 7 Storage • Switch off and unplug the appliance. •... -
Page 11: Warranty Against Defect
9 Warranty Against Defect 12 Month Warranty Thank you for your purchase from Kmart. Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided. - Page 12 Page 12 of 12...
Need help?
Do you have a question about the RMT-668 and is the answer not in the manual?
Questions and answers