c) Prevent unintentional starting. Ensure the GENERAL POWER TOOL SAFETY switch is in the off -position before connecting WARNINGS to power source and/or battery pack, picking up or carrying the tool. WARNING Carrying power tools with your fi nger on the switch Read all safety warnings, instructions, illustrations and or energising power tools that have the switch on specifi...
h) Keep handles and grasping surfaces dry, clean ADDITIONAL SAFETY WARNINGS and free from oil and grease. Slippery handles and grasping surfaces do not 1. Ensure that the power source to be utilized conforms allow for safe handling and control of the tool in to the power requirements specifi...
The specifi cations of this machine are listed in the Table on No-load speed page 9. Full-load impact rate NOTE Due to HiKOKI’s continuing program of research and φ Drilling diameter, max. development, the specifi cations herein are subject to change without prior notice.
For your continued safety and electrical shock Vibration total values (triax vector sum) determined protection, carbon brush inspection and replacement on according to EN62841. this machine should ONLY be performed by a HiKOKI Authorized Service Center. Hammer drilling into concrete: 5. Replacing supply cord h , HD = 14.7 m/s...
Page 9
DH26PMX (110 V, 230 V) 830 W 0–1100 min 0–4300 min 3.4–26 mm φ max 13 mm φ max 32 mm φ max 3.0 kg...
Date of Purchase Customer Name and Address Dealer Name and Address (Please stamp dealer name and address) Hikoki Power Tools (U.K.) Ltd. 25 Majestic Road, Southampton, SO16 OYT, United Kingdom Tel: +44 1908 660663 Fax: +44 1908 606642 URL: http://www.hikoki-powertools.uk...
Page 15
*3) EN62841-1:2015+A1:2022 EN IEC 62841-2-6:2020+A11:2020 EN55014-1:2006+A1:2009+A2:2011 EN55014-2:1997+A1:2001+A2:2008 EN61000-3-2:2014 EN61000-3-3:2013 Representative offi ce in Europe Hikoki Power Tools Deutschland GmbH 28. 2. 2023 Akihisa Yahagi Siemensring 34, 47877 Willich, Germany European Standard Manager Head offi ce in Japan 28. 2. 2023 Koki Holdings Co., Ltd.
Page 16
EN IEC 62841-2-6:2020+A11:2020 EN55014-1:2006+A1:2009+A2:2011 EN55014-2:1997+A1:2001+A2:2008 EN61000-3-2:2014 EN61000-3-3:2013 Importer and authorized person to compile the technical fi le Hikoki Power Tools (U.K.) Ltd. 25 Majestic Road, Southampton, SO16 OYT, United Kingdom 28. 2. 2023 Head offi ce in Japan Koki Holdings Co., Ltd.
Need help?
Do you have a question about the DH 26PMX and is the answer not in the manual?
Questions and answers