power source and/or battery pack, picking up or GENERAL POWER TOOL SAFETY carrying the tool. WARNINGS Carrying power tools with your fi nger on the switch or energising power tools that have the switch on WARNING invites accidents. Read all safety warnings and all instructions. d) Remove any adjusting key or wrench before Failure to follow the warnings and instructions may result in turning the power tool on.
c) When battery pack is not in use, keep it away 10. Do not touch the bit during or immediately after from other metal objects, like paper clips, coins, operation. The bit becomes very hot during operation keys, nails, screws or other small metal objects, and could cause serious burns.
WARNING CAUTION ON LITHIUM-ION BATTERY If a conductive foreign matter enters in the terminal of lithium ion battery, the battery may be shorted, causing fi re. When To extend the lifetime, the lithium-ion battery equips with the storing the lithium ion battery, obey surely the rules of protection function to stop the output.
SYMBOLS APPLICATIONS WARNING Rotation and hammering function The following show symbols used for the machine. ○ Drilling anchor holes Be sure that you understand their meaning before ○ Drilling holes in concrete use. ○ Drilling holes in tile Rotation only function (without dust extraction unit) DH18DBL / DH18DBQL / DH18DBML: ○...
Page 6
Table 1 Indications of the charge indicator lamp Lights for 0.5 seconds. Does not light for Before Blinks 0.5 seconds. (off for 0.5 seconds) Plugged into power source charging (RED) Lights for 0.5 seconds. Does not light for Blinks 1 second. (off for 1 second) Battery capacity at less than 50% (BLUE) While...
CAUTION REACTIVE FORCE CONTROL ○ If the battery is charged while it is heated because it has been left for a long time in a location subject to This product is equipped with a Reactive Force Control direct sunlight or because the battery has just been (RFC) feature that reduces jerking of the tool body.
Page 8
In the operation and maintenance of power tools, the safety regulations and standards prescribed in each country must be observed. Important notice on the batteries for the HiKOKI cordless power tools Please always use one of our designated genuine batteries. We cannot guarantee the safety and...
Page 9
DH18DBL DH18DBQL DH18DBML* 18 V 0 – 1050 /min 0 – 3950 /min 26 mm 20 mm φ max 13 mm – φ max 27 mm – φ max 3.7 kg 4.0 kg 5.8 kg * Specifi cations are for when a dust extraction unit has been installed. When used with the dust extraction unit uninstalled, the specifi...
Need help?
Do you have a question about the DH 18DBQL and is the answer not in the manual?
Questions and answers