Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for Anzzi BA-LMDFX015AL
Summary of Contents for Anzzi BA-LMDFX015AL
- Page 3 PRODUCT SIZE CHART BA-LMDFX015AL Dia 32" 32" [813 mm] MOUNTING DIMENSIONS 1.18"[30mm] 18.31" [465mm]...
- Page 4 For the style of LED Mirror shown below Please read carefully and save these instructio Don’t discard any of the packaging until you are sure that you have all of the parts and the fittings. DANGER Make sure power to the junction box or outlet is off before commencing installation. Always unplug the mirror from the outlet or turn off the switch before cleaning or servicing to reduce the risk of electric shock.
-
Page 5: Installation Instructions
Do not use attachments that are not recommended by the manufacturer. guide. Statement: ANZZI does not assume any Make sure that the electricity is turned off at the responsibility for the losses caused by the power source before proceeding with the installation or cleaning. - Page 6 INSTALLATION INSTRUCTIONS SCREW WALL PLUG Twist-cap Connector (x2) (x2) (x3) Make sure the holes of template matches the hanging Position Template x1 holes of the mirror. distance deck surface According to the height "H" of the product, place the Position Template horizontally on the wall and mark Measure the distance "h"...
- Page 7 INSTALLATION INSTRUCTIONS 1/4” - 5/16” The LED mirror is provided with a power supply cord. If drilling into wood, drill a 1/8” hole at each marked For the plug-in connection, place the mirror against the location (figure A) and install screws into holes. If wall and slide down as shown.
-
Page 8: Operation
OPERATION Turn on the power supply before you use the mirror. Press this key to turn the LED light on or off. The defogger operates when the LED light is turned on. Press and hold to change the color temperature from 2700-6500k. It will change gradually(2700-6500k).
Need help?
Do you have a question about the BA-LMDFX015AL and is the answer not in the manual?
Questions and answers