Anzzi BA-LMDFX022AL Installation & Operation Manual

Front & back lighting led mirror

Advertisement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BA-LMDFX022AL and is the answer not in the manual?

Questions and answers

Summary of Contents for Anzzi BA-LMDFX022AL

  • Page 3 PRODUCT SIZE CHART BA-LMDFX022AL 48" * 30" 48"[1220mm] MOUNTING DIMENSIONS 41.14" [1045mm] 1.26"[32mm] 6.69" [170mm]...
  • Page 4 For the style of LED Mirror shown below Please read carefully and save these instructio Don’t discard any of the packaging until you are sure that you have all of the parts and the fittings. DANGER Make sure power to the junction box or outlet is off before commencing installation. Always unplug the mirror from the outlet or turn off the switch before cleaning or servicing to reduce the risk of electric shock.
  • Page 5: Installation Instructions

    Do not use attachments that are not recommended by the manufacturer. guide. Statement: ANZZI does not assume any Make sure that the electricity is turned off at the power source before proceeding with the responsibility for the losses caused by the installation or cleaning.
  • Page 6 INSTALLATION INSTRUCTIONS SCREW WALL PLUG Twist-cap Connector (x2) (x2) (x3) This mirror can be hung horizontally or vertically. Position Template x2 Make sure to use the right template. (Vertical and horizontal mount options) deck surface According to the height "H" of the product, place the Position Template horizontally on the wall and mark Measure the distance "h"...
  • Page 7 INSTALLATION INSTRUCTIONS 1/4” - 5/16” The LED mirror is provided with a power supply cord. If drilling into wood, drill a 1/8” hole at each marked For the plug-in connection, place the mirror against the location (figure A) and install screws into holes. If wall and slide down as shown.
  • Page 8: Operation

    OPERATION Turn on the power supply before you use the mirror. Press this key to turn the LED light on or off. Press and hold to change the color temperature from 2700-6500k. It will change gradually(2700-6500k). Press this key to turn the defogger on or off. Press and hold to change the brightness from 10%-100%.

Table of Contents