Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Anzzi BA-LMDFX012AL
Summary of Contents for Anzzi BA-LMDFX012AL
- Page 3 PRODUCT SIZE CHART BA-LMDFX012AL 32" * 24" 32"[813mm] BLUETOOTH VOLUME CONNECTION DATE CLOCK mm/dd hr/min TEMPERATURE MOUNTING DIMENSIONS 28.62"[727mm] 2.13"[54...
- Page 4 For the style of LED Mirror shown below Please read carefully and save these instructio Don’t discard any of the packaging until you are sure that you have all of the parts and the fittings. DANGER Make sure power to the junction box or outlet is off before commencing installation. Always unplug the mirror from the outlet or turn off the switch before cleaning or servicing to reduce the risk of electric shock.
- Page 5 Do not use attachments that are not recommended by the manufacturer. guide. Statement: ANZZI does not assume any Make sure that the electricity is turned off at the power source before proceeding with the responsibility for the losses caused by the installation or cleaning.
- Page 6 INSTALLATION INSTRUCTIONS SCREW WALL PLUG Twist-cap Connector (x2) (x2) (x3) Make sure the holes of template matches the hanging Position Template x1 holes of the mirror. distance deck surface According to the height "H" of the product, place the Position Template horizontally on the wall and mark Measure the distance "h"...
- Page 7 INSTALLATION INSTRUCTIONS 1/4” - 5/16” The LED mirror is provided with a power supply cord. If drilling into wood, drill a 1/8” hole at each marked For the plug-in connection, place the mirror against the location (figure A) and install screws into holes. If wall and slide down as shown.
- Page 8 Turn on the bluetooth function on the cell phone to start bluetooth matching. c. Select the ‘ANZZI smart mirror’ device on the cell phone to create connection between the mirror and the cell phone. d. After the connection is success, the mirror will sound a tone to indicate a successful pairing connection.
Need help?
Do you have a question about the BA-LMDFX012AL and is the answer not in the manual?
Questions and answers