Dual Alarms Operation - JVC RA-F320B Operating Instructions Manual

Alarm clock radio
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 39

DUAL ALARMS OPERATION

Before se ng the alarm me, make sure the Clock has been set.
Se ng Alarm 1 / Alarm 2
1.
In clock me state, press
The AL1 indicator light and hour digits will ash on the display.
2.
While the hour digits are ashing, set hours for alarm 1 by repeatedly pressing
/ .
Press and hold
3.
Press
The minute digits will ash.
4.
Whilst the minute digits are ashing, set minutes for alarm 1 by repeatedly pressing
/ .
Press and hold
5.
Press
"OFF" will ash on the display.
6.
Whilst "OFF" is ashing, set the alarm to wake to the desired mode by repeatedly
pressing
/ .
rd = wake-by-radio
bu= wake-by-buzzer
OFF= alarm o
7.
Press
The AL2 indicator light and hour digits will ash on the display.
Follow steps 2 to 7 to set the alarm 2.
8. When the alarm 1 or 2 is sounding, the AL1 or AL2 indicator light will ash.
9. The alarm will sound for 3 minutes at the preset me on each day and come back
again a er 9 minutes. The alarm will last for 1 hour.
To stop the alarm, Press
me on the following days.
Snooze func on
When the alarm sounds, press
again a er the set snooze dura on.
NOTE: If your second alarm activates while the first alarm is
sounding or it is in the snooze mode, the second alarm will override
the first alarm (the first alarm will be reset to come on the next
day).
.
/
for fast se ng.
to con rm.
/
for fast se ng.
to con rm.
to con rm.
or
. The alarm will come on again at the set
. The alarm will be turned o and come on
EN-5

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

Table of Contents