Advertisement
Operating
Instructions
Vent Control
The vent control is located above the control knobs.
For maximum cooling efficiency, CLOSE the vent. This will allow internal air
circulation.
OPEN the vent to discharge stale air.
Adjusting the air flow Direction
Airflow can be adjusted by changing the direction of the air conditioner°s
louvers. This can also increase the cooling efficiency of the air
conditioner.
Adjusting Horizontal Air Flow Direction
Adjusting the vertical louvers left and right will change horizontal airflow.
Adjusting Vertical Air flow Direction
Adjusting the horizontal louvers up and down will change vertical airflow.
The louvers can be adjusted by nudging the back or up and down of the
vertical louvers.
Recommended Orientation of louvers
Adjust louvers to face upwards when cooling to maximize cooling
efficiency.
Care and
Maintenance
Turn the power off and unplug the power plug before cleaning the air conditioner.
Grille and Case
Use water and mild detergent when cleaning. Do not use bleach or harsh abrasives.
Rear Coils
Check the rear coils on a regular basis. It should be professionally steam- cleaned if
it is clogged with dirt or soot. Professional cleaning service is available at your local
dealer or service center.
Adjusting the Air Flow Direction
Care and Maintenance
11
CLOSE
VENT
To open the vent, pull the lever toward you.
To close it, push it in.
OPEN
Advertisement
