19
6. Order of Installation
7) Change of Door Open Direction of Refrigerator
※ Perform work for changing the door before installation.
1. Loosely release the screws ❶,
❸ of the hinge on the case part
of the freezer and then
separate the door by pushing it
to the right (See Figure 23).
2. Release the screws No. ❶, ❸
completely and then fix them
loosely to the reverse side (See
Figure 24)
3. Separate the hinge by releasing
the No. ❷, ❹ bolt to the door.
4. Move the separated hinges
(Figure 24) diagonally and fix it
to the door by turning the
hinge by 180˚.
5. Push the hinge from the left
side to the right side to ensure
that the door hinge and the
screws are fixed to the case
match.
6. Adjust the top/down or the
left/right interval of the
refrigerator door so that
leaning should not occur to
either side, and then tighten
screws.
7. If the hinge bolting is
completed, insert the ⑭ cap
screws at the opposite side of
the hinge (6 places).
※ Same as above order for change of the door open direction of the fridge door.
(Fig. 24)
(Fig. 23)