Table of Contents
Advertisement
Fault
lights up.
flashes.
"H:95" lights up altern-
ately with End.
All other error codes.
The appliance is not
working.
The programme does
not start.
Cause and troubleshooting
The tap is turned off.
Turn on the tap.
▶
The water inlet hose is kinked or jammed.
Ensure that the water inlet hose is not kinked or
▶
jammed.
Water level measurement system is defective.
Call the after-sales service.
▶
→ "Customer Service", Page 48
The temperature is too high.
Wait until the temperature has dropped.
▶
→ "Cancelling the washing programme", Page 30
▶
Water level is too high.
Select a suitable programme for draining.
▶
→ "Programmes", Page 25
Door is not closed.
Close the door.
1.
Press
Start/Reload to start the programme.
2.
Laundry is caught in the door.
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press
Start/Reload to start the programme.
4.
Drum cleaning is required.
→ "Cleaning the drum", Page 33
▶
The water pressure is low.
See
▶
→ "
", Page 39
Malfunction
Call the after-sales service.
▶
→ "Customer Service", Page 48
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
The circuit breaker in the fuse box has tripped.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Check whether the lighting in your kitchen or other
▶
appliances are working.
You have not pressed
Press
Start/Reload.
▶
Troubleshooting en
Start/Reload.
39
Advertisement
Table of Contents
