Pole-Mounting Your Party Speaker; Factory Reset; Update Firmware Via Usb - AOC SPEAKER O3 User Manual

Vocal fader
Press the Vocal fader button to switch
between vocal fader on and off.
Voice changer
Press the Voice changer button on
the panel to switch among different
voice tones: Woman voice / Man voice /
Children voice / Normal effect.
Pole-Mounting your
Party speaker
1
Remove the cover from the bottom
of the party speaker (please keep
the cover).
2
Lift the party speaker to a speaker
tripod (sold separately).
3
Adjust the speaker tripod to the
appropriate height.
Bottom View
1
2
18 EN

Factory reset

Reset device to default setting.
1
When the speaker is power on,
press and hold
for 10 seconds.
» Battery capacity LEDs flash three
» The party speaker is reset and

Update firmware via USB

1
Check if there is the latest firmware
version on https://aoc.com. Search
for your model and click on
Support > Software and drivers.
2
Copy the software update files into
3
USB flash drive, insert USB flash
drive on the unit.
3
Press and hold DBB key for 8 seconds
in power on state with power cable plug.
LED2 (Red)
Slow blinking
Fast blinking
LED off
+ and
times.
enters standby mode.
Software update les
3
8sec
Status
Enter upgrade mode
Upgrade start
Upgrade finished and
restart
buttons
1
2
Red