Pairing for stereo mode
(TWS)
Two speakers can pair with each other
for stereo sound.
Note
•
TWS is worked only if there are two identical
party speakers (SPEAKER O3).
Select master speaker manually
1
Press and hold
to power on both speakers and
enter to Bluetooth pairing mode.
» The LED indicator (LED3) on both
speakers blink blue.
2
Select one speaker as master and
connect to Bluetooth.
» LED3 on master speaker turns
solid blue once Bluetooth is
connected.
3
Press and hold
both speakers for 3 seconds to
enter stereo pairing mode (TWS).
» LED3 blinks blue and white
alternatively on both speakers
4
When TWS is connected, you will
hear a voice prompt.
» LED3 turns solid blue on both
speakers.
5
To exit TWS, press and hold
button on either speaker.
Select master speaker
automatically
1
Press and hold
seconds to power on both speakers.
» The LED indicator (LED3) on both
speakers blink blue.
14 EN
key for 3 seconds
(TWS) button on
(TWS)
touch key for 3
2
Press and hold
both speakers for 3 seconds to
enter stereo pairing mode.
» The first speaker entered TWS
mode is master and LED3 on
master speaker turns sold blue.
» The volume level, play/pause
state, light mode in slave
speaker will sync from master
speaker after TWS connected.
3
To exit TWS, press and hold
button on either speaker.
Note
•
During TWS pairing mode, both master and
slave speaker will return to previous state
automatically after 1 minute without user
operations or TWS pairing is not successful.
TWS playback operation
When TWS is connected, the slave
speakers will synchronize from master
speaker of below functions.
•
Light effect
•
Volume level
•
Play/pause
•
DBB (bass) level
Key & Operate
Press
key on
either speaker
+
-
Press VOL
/
key
on either speaker
Press DBB key on
either speaker
Press and hold
key on either
speaker for 3
seconds
TWS button on
(TWS)
Action
Select Play/pause
the music on both
speakers
Increase or
decrease volume
on both speakers
Change DBB
setting on both
speakers
Power off both
speakers