Table of Contents
Advertisement
3 Get started
When you use this unit for the first time
or unused for long periods of time,
recharge the battery fully.
Note
•
For identification and supply ratings, see
the type plate at the back or bottom of the
product.
•
Before you make or change any connections,
make sure that all devices are disconnected
from the power outlet.
Connect to power
WARNING!
•
Risk of product damage! Make sure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the product.
•
Risk of electric shock! When you unplug the
power cord, always pull the plug from the
socket. Never pull the cord.
•
Before connecting the AC power cord, ensure
you have completed all other connections.
Connect the mains cable to the AC in~
socket of the party speaker and then
into a mains socket.
or
or
* Power cord quantity and plug type
vary by regions.
10 EN
AC in ~
Turn On and Off
Press and hold
seconds to switch on/off the unit.
Note
•
The speaker will turn off automatically after 15
minutes without user operations and music
playback.
•
In case of no response of button or function
error, you can press and hold Vocal fader and
buttons for 10 seconds to force shutdown,
then turn on the unit again to be used
normally.
Volume control
Press +/－ touch key to increase or
decrease volume level.
Tip
•
While adjusting the volume, the white speaker
light will move up or down for 3 seconds.
•
When the volume meets the maximum /
minimum level, both the speaker light and four
LED indicators will blink white three times.
DBB control
Short press DBB touch key to switch the
DBB (bass) level.
Function
LED1 (Yellow)
DBB2
LED1 flash twice then solid
DBB1
LED1 flash once then solid
DBB off
LED1 off
touch key for 3
Advertisement
Table of Contents
