Partylink Mode - AOC SPEAKER O3 User Manual

Key & Operate
Press and hold key
on either speaker for
3 seconds in standby
state
Press key on
either speaker
Press and hold
key on either
speaker for 3
seconds
Press and hold
button on either
speaker for 3
seconds
Change to Audio in and USB source
In TWS mode, plug USB/AUX device to
master speaker, source will switch to
USB/AUX source.
Master speaker

PartyLink mode

The speaker can connect up to 100
party speakers together and play audio
at the same time.
Enter PartyLink mode
1
Press and hold
to power on party speakers and
enter to Bluetooth pairing mode.
» The LED indicator (LED3) on both
speakers blink blue.
2
Select one speaker as master and
connect to Bluetooth.
Action
Power on selected
speaker and enter
TWS reconnection
Change light mode
in both speakers
Change brightness
in all speakers
Exit TWS mode
Audio in
2
1
Master speaker
Audio in Audio out Audio in
1
2
key for 3 seconds
» LED3 on master speaker turns
solid blue once Bluetooth is
connected.
3
Press and hold PartyLink button on
all speakers for 3 seconds to enter
PartyLink pairing mode.
» LED4 blinks green and white
alternatively on all speakers.
4
When PartyLink is connected, you
will hear a voice prompt.
» LED3 on slave speakers turns
solid white.
» LED4 remains blinking green and
white alternatively on master
speaker.
» Volume level, play/pause state,
light mode in slave speakers will
sync from master speaker after
PartyLink connected.
5
Press and hold PartyLink button
on master speaker. All speakers will
exit PartyLink mode.
Note
•
During PartyLink pairing mode, slave speaker
will return to previous state automatically after
1 minute without user operations or PartyLink
pairing is not successful.
•
No timeout on master speaker.
PartyLink playback operation
When PartyLink is connected, the slave
speakers will synchronize from master
speaker of below functions.
• Light effect
•
Volume level
• Play/pause
•
DBB (bass) level
EN 15