Storage; Disposal; What If There Are Problems; Technical Data - Beurer HD 50 Instructions For Use Manual

6. Storage

If you do not plan to use the electric overblanket for a long period of time, we recommend that you store it in
the original packaging. For this purpose, disconnect the controller from the electric overblanket by unplug-
ging the plug-in coupling.
CAUTION
Allow the electric overblanket to cool down before folding. Otherwise
the electric overblanket may be damaged. Do not crease the electric
overblanket by placing items on top of it during storage.

7. Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of its
useful life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the device
in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have
any questions, please contact the local authorities responsible for waste disposal.

8. What if there are problems?

Problem
The indicator lamp is not illuminated while
- the controller is properly connected to the electric overblanket
– the mains plug is connected to a working socket
- the sliding switch for ON/OFF and temperature settings is set
to 1, 2, 3, 4, 5 or 6

9. Technical data

See the type plate label on the electric overblanket.

10. Warranty / service

In case of a claim under the warranty please contact your local dealer or the local representation which is
mentioned in the list "service international".
In case of returning the unit please add a copy of your receipt and a short report of the defect.
The following warranty terms shall apply:
1. The warranty period for BEURER products is either 3 years or- if longer- the country specific warranty
period from date of Purchase.
In case of a warranty claim, the date of purchase has to be proven by means of the sales receipt or invoice.
2. Repairs (complete unit or parts of the unit) do not extend the warranty period.
3. The warranty shall not be valid for damages because of
a. improper treatment, e.g. nonobservance of the user instructions.
b. repairs or tampering by the customer or unauthorised third parties.
c. transport from the manufacturer to the consumer or during transport to the service centre.
d. The warranty shall not be valid for accessories which are subject to normal wear and tear (cuff,
batteries etc.).
4. Liability for direct or indirect consequential losses caused by the unit are excluded even if the damage
to the unit is accepted as a warranty claim.
Cause
The safety system has
switched the electric
overblanket off perma-
nently.
14
Solution
Send the electric
overblanket and
the controller for
servicing.