Table of Contents
Advertisement
7.7 Permanent extra rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
• To activate/deactivate this option
press Poupar Tempo and Início Diferi-
do at the same time until the indicator
Enxag. Extra comes on/goes off.
7.8 Acoustic signals
The acoustic signals operate when:
8. BEFORE FIRST USE
1.
Put 2 litre of water in the detergent
compartment for washing phase.
This activates the drain system.
2.
Put a small quantity of detergent in
the compartment for washing phase.
9. DAILY USE
9.1 Loading the laundry
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic sig-
nals, press Temp. °C and Centrif. at the
same time for 6 seconds.
If you deactivate the acoustic sig-
nals, they continue operate when
the appliance has a malfunction.
3.
Set and start a programme for cot-
ton at the highest temperature with-
out laundry. This removes all possi-
ble dirt from the drum and the tub.
1.
Open the appliance door.
2.
Put the laundry in the drum, one
item at a time. Shake the items be-
fore you put them in the appliance.
Make sure not to put too much laun-
dry in the drum.
3.
Close the door.
CAUTION!
Make sure that no laundry stays
between the seal and the door.
There is a risk of water leakage or
damage to the laundry.
ENGLISH
11
Advertisement
Table of Contents
