Table of Contents
Advertisement
10 www.aeg.com
Programmes
The information given in the chart above are in compliance with the EU Com-
mission regulation 1015/2010 implementing directive 2009/125/EC.
1) At the end of spin phase.
7. OPTIONS
7.1 Temperature (Temp. °C)
Set this option to change the default
temperature.
Indicator
The indicator of the set temperature
comes on.
7.2 Spin (Centrif.)
With this option you can change the de-
fault spin speed.
The indicator of the set speed comes on.
Additional spin options:
Rinse Hold
• Set this option to prevent the laundry
creases.
• The related indicator comes on.
• There is a water in the drum when the
programme is completed.
• The drum turns regularly to prevent
the laundry creases.
• The door stays locked.
• You must drain the water to unlock the
door.
To drain the water refer to 'At
the end of the programme'.
7.3 Extra Rinse (Enxag. Extra)
With this option you can add some rin-
ses to a washing programme.
Use this option for persons allergic to
detergents and in areas where the water
is soft.
The related indicator comes on.
Load
Energy con-
(Kg)
sumption
(kWh)
= cold water.
Water con-
Approxi-
sumption (li-
mate pro-
tre)
gramme
duration
(minutes)
7.4 Time save (Poupar Tempo)
With this option you can decrease the
programme duration.
• Press this button one time to set
'Shortened duration' for items with
daily soil.
• Press this button two times to set 'Ex-
tra Quick' for items with almost no
soil.
Some programmes accept only
one of the two functions.
7.5 Delay Start (Início Diferido)
With this option you can delay the start
of a programme from 30 minutes to 20
hours.
The indicator of the option is on.
7.6 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option,
press Enxag. Extra and Poupar Tempo
at the same time until the indicator
comes on/goes off.
You can activate this option:
• After you press Início/Pausa, the op-
tions and the programme knob are
locked.
• Before you press Início/Pausa: the ap-
pliance cannot start.
Remaining
moisture
1)
(%)
Advertisement
Table of Contents
