Dell P5524QT User Manual page 55

Select OSD items of On in Standby Mode in Personalize feature, the following message
will appear:
If adjust the Brightness level above the default level over 75%, the following message
will appear:
If you press any button other than the power button, the following messages will
appear depending on the selected input:
Dell 55 Monitor
Changing to this setting (without
power consumption, Do you want to continue?
Yes
Dell 55 Monitor
Adjusting to this value will increase power consumption above
the default level. Do you want to continue?
Yes
Dell 55 Monitor
No HDMI 1 signal from your device.
Press any key on the keyboard or move the mouse or wake it up.
If there is no display, press the monitor button again to select the correct
input source.
symbol) will Increase
No
P5524QT
No
P5524QT
P5524QT
Operating the display | 55