Table of Contents
Advertisement
Figure 2. Rear view with dual, high availability, nodes
Top controller, node A
1
Figure 3. Rear view of controller nodes
Host Interface Card slot 1
1
Power Supply
3
USB Type-A port
5
1 GbE RJ-45 management port
7
25 GbE SFP28 connectors (2)
9
1 2
Host Interface Card (HIC) slots
You can find the Host Interface Card (HIC) slot numbers on the rear of each controller.
3
Power supply
The hot-swap redundant power supplies help you avoid significant interruption to the operation of the
system when a power supply fails.
On each power supply, there are multi-color status LEDs near the power cord connector. For information
about the status LEDs, see
RJ-45 console port
4
The RJ-45 console port connection provides serial access to the nodes BMC management network device.
5
USB Type-A port
The USB Type-A port is a Read-Only connection that can be used for ONTAP netboot and system updates.
6
Micro-USB console port
"Rear view LEDs" on page
Bottom controller, node B
2
Host Interface Card slot 2
2
RJ-45 console port
4
Micro-USB console port
6
10 Gbase-T Ethernet RJ45 ports (2)
8
8.
.
Chapter 2
System components
7
Advertisement
Table of Contents
