Chapter 4 - Using More Of Your Tv; Installing Channels; Common Interface; Using The Common Interface Module - TCL C835 Manual

Chapter 4 - Using more of your TV

Installing channels

This section describes how to search and store
channels automatically. This may be done in any of
the cases below:
- you have skipped the channel installation step in the
initial setup;
- you are prompted that there are no channels in TV
mode;
- you want to update your channels.
1. In TV mode, press
and select Settings > Channels and inputs >
Channel > Channel scan. Press OK/► to enter.
2. The TV installs and arranges channels according
to your country or region. Press ▲/▼ to select
Country/Region, and press OK/► to enter. Enter
the default password 1234 or your own password
in case you have changed the password in the
System > Lock menu. Press ▲/▼ to select your
country or region and press OK to confirm.
3. Press ▲/▼ to select Automatic search and press
OK to enter.
4. Press ▲/▼ to select Tuner mode and press
◄/► to select Cable, Antenna or Satellite.
(Note: Satellite option is available only in selected
models.)
5. Press ▲/▼ to select other options to configure.
6. After configuration is completed, press ▼ to select
Search and press OK to start scanning channels.
7. The channel search may take a few minutes. After
the automatic search, channels are arranged in a
preset order. If you want to edit the channel list,
on the remote control, select Settings
press
> Channels and inputs > Channel > Channel
organizer and press OK to enter.

Common interface

Encrypted digital TV channels can be decoded with a
common interface module and a card provided by a
digital TV service operator.
The common interface module may enable several
digital services, depending on the operator and
services you choose (for example, pay TV). Contact
your digital TV service operator for more information
about services and terms.

Using the common interface module

WARNING: Switch off your TV before inserting a
common interface module. Be sure to follow the
instructions described below. Wrong insertion of
a common interface module may damage both the
module and your TV.
on the remote control
1. Following the directions printed on the common
interface module, gently insert the module into the
common interface slot on the TV.
2. Push the module in as far as it will go.
3. Turn on the TV and wait for the common interface
function to be activated. This may take several
minutes.
Note: Do not remove the common interface
module from the slot. Removing the module
will deactivate the digital services.

Accessing common interface services

After inserting and activating the common interface
module, press on the remote control, select
Settings > Channels and inputs > Channel >
Common interface and press OK to enter.
This menu option is only available if the common
interface module is correctly inserted and activated.
On-screen applications and content are provided by
your digital TV service operator.

Using subtitles

You can enable subtitles for each TV channel.
Subtitles are broadcast via Teletext or DVB-T/DVB-C/
DVB-S/DVB-T2/DVB-S2 digital broadcasts. With
digital broadcasts, you have the additional option of
selecting a preferred subtitle language.

Turning on/off subtitles

1. Press on the remote control, select Settings >
Channels and inputs > Channel > Subtitle and
press OK/► to enter.
2. Select the Subtitle option, and press OK to toggle
between on or off.
3. Press to return to the previous menu.

Enabling subtitle languages on digital TV

channels

1. Press on the remote control, select Settings
> Channels and inputs > Channel > Subtitle >
Digital subtitle language 1st and press OK/► to
enter.
2. Press ▲/▼ to select a subtitle language as your
preferred language and press OK to confirm.
3. Press ▲/▼ to select Digital subtitle language
2nd and press OK/► to enter.
4. Press ▲/▼ to select a secondary subtitle language
and press OK to confirm.
5. Press to return to the previous menu.
EN 11