Reset To Factory Default Settings; Using The Hands-Free Tv Voice Control; Variable Refresh Rate; Apple Airplay And Homekit - TCL C835 Manual

Hide thumbs Also See for C835:
Table of Contents

Advertisement

When the TV is in networked standby mode, you can
use the App to wake up the TV remotely.
Notes:
- This feature is disabled if you press and hold the
button on the remote control and confirm to
shut the TV down.
- Before using the feature of networked waking up,
make sure the Quick start function is enabled.
- This function may not be available for certain
models.
- This feature is only available in Google TV mode.

Reset to factory default settings

Allows you to reset the TV to factory default settings.
1. Press
on the remote control, select Settings
> System > About > Reset > Factory reset >
Delete everything and press OK to confirm.
2. Use the numeric buttons on the remote control to
enter the password 1234 or your own password in
case you have changed it.
3. Select OK and press OK to confirm.
4. The Welcome screen appears. Follow the
instructions in the section Initial setup.

Using the hands-free TV voice control

Before using the hands-free TV voice control, connect
the TV to the network and make sure it can access
the Google website first. Then follow the steps below
to access.
1. Turn the built-in MIC switch (Please refer to the
Quick Start Guide to find the MIC switch on your
TV set) to on before using this function.
2. Press
on the remote control and follow the on-
screen guide to finish pairing the remote control
with the TV.
3. Select "Yes, I'm in".
4. Say "OK Google" or "Hey Google" to activate it.
Notes:
- This hands-free TV voice control is only available
for selected models. For details, please refer to
your local dealer.
- A quiet surrounding is required for better function
when using it. The recommended distance for
using the hands-free TV voice control is within 2
meters in front of it.
- Turn the built-in MIC switch to off if you are not
going to use it.
- The availability of hands-free TV voice control
depends on your region/country/language.
- Turn on both Quick start and Screenless
service in the Settings > System > Power and
energy menu to enjoy hands-free voice control
in TV standby
- Standby power consumption will increase
because the built-in MIC is always listening
when the Google Assistant or voice control with
the built-in MIC is enabled.
- This feature is only available in Google TV
mode.

Variable Refresh Rate

Variable Refresh Rate is a feature that will allow
smooth gaming and eliminate screen tearing. The
refresh rate can dynamically change to up to 144hz.
Under source of HDMI1, HDMI2, HDMI3 or
HDMI4(the number of HDMI socket on the TV will
vary according to TV model), press
control and select Settings > Channels and inputs
> Inputs > Variable Refresh Rate
toggle between on or off.
Notes:
- 4K@144Hz is only available on HDMI 1 (not
available in all models). PC Graphics card must
be able to output 144Hz, please check your
graphics card specifications.
- 4K@120Hz is only available on HDMI 1 or HDMI
2.
- some models support refresh rate up to 120Hz.
- You need to make sure your Games Console or
PC support Variable Refresh Rate, and you may
need to check your games console settings to
activate the function.
- The game/content also will need to support
Variable Refresh Rate, and you may also need
to check the settings within the game.

Apple AirPlay and HomeKit

Wirelessly share content with your TV using AirPlay
and control your TV using the Home app on your
iPhone, iPad, or Mac. You can set up AirPlay and
HomeKit at any time in Settings menu.
The function is enabled by default. To use the
function, make sure your iPhone, iPad, or Mac is iOS
or iPadOS device and the WiFi on the iOS or iPadOS
device is turned on. Then follow the steps below to
operate.
1. Press
on the remote control, select Settings
> System > AirPlay and HomeKit Settings and
press OK to enter, or press
on the remote control, then select Inputs >
AirPlay > AirPlay and HomeKit Settings and
press OK to enter.
2. Press ▲/▼ to select the desired item and press
OK to enter the corresponding submenu.
EN 14
Using more of your TV
mode.
on the remote
and press OK to
,
or
(if available)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

55c835

Table of Contents