Chapter 4 - Using More Of Your Tv; Scanning For Broadcast Channels; Using Subtitles; Turning On/Off Subtitles - TCL RC630K User Manual

Chapter 4 - Using more of your TV

Scanning for broadcast channels

This section describes how to scan for broadcast
channels automatically. This may be done in any of
the cases below:
- you are prompted that there are no broadcast
channels in TV mode;
- you want to update your broadcast channels.
1. In TV mode, press
select Settings > TV inputs > Live TV > Set up
input.
2. Press OK to start finding channels.

Using Subtitles

You can enable subtitles for each TV channel.
Subtitles are broadcast via DVB-T/T2 digital
broadcasts. With digital broadcasts, you have the
additional option of selecting a preferred subtitle
language.

Turning on/off Subtitles

1. Press on the remote control, select Settings >
Accessibility > Subtitles mode and press OK
to enter.
2. Select the Off/On always/On replay/On mute
option, and press OK to disable/enable this
function.
3. Press to close the menu.

Set Subtitle preferred language

1. Press on the remote control, select Settings >
Accessibility > Subtitles preferred language
and press OK to enter.
2. Press select a subtitle language as your
preferred language and press OK to confirm.
3. Press to close the menu.

Turning on/off Hard of hearing

1. Press on the remote control, select Settings >
Accessibility > Hard of hearing and press OK
to enter.
2. Select the On/Off option, and press OK to enable/
disable this function.
3. Press to close the menu.

Control other devices (CEC)

Use this function to search for CEC devices connected
to the HDMI sockets in your TV and enable one-touch
play and one-touch standby between CEC devices.
on the remote control and

Enabling or disabling CEC

1. Press on the remote control, select Settings >
System > Control other devices (CEC) and
press OK to enter.
2. Select the One-touch play/System standby
option, and press OK to enable/disable the option.
3. Press to close the menu.

Using One-touch play

Enables other devices to automatically switch the TV
to use it as the active source/input when playback
starts. Press OK to turn it on to enable this function.

Using System standby

Enables all CEC devices to automatically go to the
standby mode when your TV goes to standby mode.
Press OK to enable this function.
Note: The CEC functions depend on the devices
connected and it is possible that some
devices may not interoperate correctly when
connected to this TV. The user manual or
the manufacturer of the problematic devices
should be consulted for further information.

HbbTV

HbbTV (Hybrid broadcast broadband TV) is a service
offered by certain broadcasters and available only on
some digital TV channels. HbbTV delivers interactive
television over broadband Internet. These interactive
features are added to and enrich the normal digital
programmes, and include services such as digital
teletext, electronic programme guide, games, voting,
specific information related to the current programme,
interactive advertising, information magazines, catch-
up TV, etc.
To use HbbTV please ensure your TV is connected to
Internet and HbbTV is switched on.
Notes:
- HbbTV services are broadcast- or country-
dependent and may be unavailable in your area.
- You cannot download files to your TV with
HbbTV function.
- Application provider or broadcasting related
conditions may cause an HbbTV application to
be unavailable temporarily.
- To access HbbTV applications you must connect
your TV to the Internet via a broadband link.
HbbTV applications may not work correctly in
case of network related issues.
EN 12