Table of Contents
Advertisement
OPERATION
26
required and recommended to avoid linting and
unbalanced errors when the load is bulky but
lightweight.
• Press Water option until the desired water level
is selected. The water level is indicated on the
display.
• When water level is automatically detected, it
may differ depending on the amount of laundry
even though the same water level is indicated on
the control panel.
Wash
Adjusting the wash time setting modifies the cycle
times and/or wash actions.
• Press Wash button until the desired wash time is
selected. The wash time is indicated on the
display.
Rinse
Use this option to change the number of rinses.
• Press Rinse button to change the number of
rinses. The number of rinses is indicated on the
display.
Spin
Use this option to change the spin time.
• Press Spin button until the desired spin time is
selected. The spin time is indicated on the
display.
• When you press the START/PAUSE button after
selecting this option, the remaining time is
indicated on the display.
Using Special Options
You can customize the programmes by using the
following special options:
TurboWash
Adding this option reduces the programme time
but the similar washing results will be provided.
NOTE
• If the water pressure of tap water is less than 100
kPa, water does not come out from the JetSpray
nozzle on the top of the drum, but water comes
out from the detergent drawer.
Steam (For Steam Models Only)
Adding this option helps provide better cleaning
results.
Strong Wave (For Non-Steam Models Only)
Use this option to change the strong water wave.
• It is set to medium water wave by default.
Temp.
Use this option to change water temperature.
Scent+
Use when you want to leave a strong fragrance of
the softener on the fabric.
Follow the next steps to use a special
option.
1
Press the POWER button.
2
Select a washing programme.
3
To use special options (For Steam Models
Only),
• Steam: Press the Steam button.
• TurboWash: Press and hold the Steam
button for 3 seconds.
• Temp.: Press the Temp. button until the
desired setting is lit.
• Scent+: Press and hold the Temp. button for
3 seconds.
To use special options (For Non-Steam Models
Only),
• TurboWash: Press the TurboWash button.
• Strong Wave: Press and hold the
TurboWash button for 3 seconds.
• Temp.: Press the Temp. button until the
desired setting is lit.
• Scent+: Press and hold the Temp. button for
3 seconds.
4
Press the START/PAUSE button.
Advertisement
Table of Contents
