Table of Contents
Advertisement
Remote control
The A200 is supplied with a handheld infra-red remote control, which shares many of the
front panel functions along with some additional controls, as described below.
MODE
CH- / CH+
EQ
/
/
0 - 9
Bluetooth connection
The Bluetooth function allows connection of a smart phone or tablet to the media player
section for playback of stored files or streamed digital audio. To enable this function, it will be
necessary to pair the sending device to the receiver as follows.
1. Press the media player MODE button until the display shows "
2. Open the Bluetooth settings menu on the smart phone or tablet
3. Scan for Bluetooth devices and look for "A200" in the list of available devices (ensure
that the A200 is powered on with Bluetooth selected and within reception range)
4. Select "A200" and the sending device should confirm that it is connected as an audio
device.
5. Play audio from the sending device, ensuring that volume controls are not turned
down or muted
If the sending device goes out of range, connection will only resume when back in range.
Likewise, if a different mode is selected, connection should resume when Bluetooth mode is
re-selected.
If Bluetooth is disabled on the sending device or paired to a different receiver, it will be
necessary to re-connect the sending device to the A200 from step 2 above to re-establish a
Bluetooth link.
Media player power on/standby button
Repeat mode – select Random, One, Folder or All tracks
Select USB, SD, FM tuner or Bluetooth mode
Select FM radio station
Select EQ – Bass, Pop, Rock, Jazz, Classical or Normal
Previous or Next track select
Play / Pause track (auto-tune in FM tuner mode)
Adjust media player volume down or up
Direct track or channel access – key in track number
"
953.425UK User Manual
Advertisement
Table of Contents
