Do you have a question about the Molino and is the answer not in the manual?
Questions and answers
Lori
May 16, 2025
How to pair Molina fan & remote again. Fam remote doesn’t work. Batteries good, wall switch & breaker good.
1 comments:
Mr. Anderson
May 22, 2025
To pair the MinkaAire Molino fan with its remote, follow these steps:
1. Turn off power to the fan at the circuit breaker. 2. Access the receiver by removing the fan canopy. 3. Check and set DIP switches on both the receiver and the remote to matching positions. 4. Turn the power back on. 5. Enter learning mode: Within 30 seconds of restoring power, press and hold the "Learn" button on the remote until the fan responds (usually a beep or movement). 6. Test the remote to confirm pairing.
Ensure the fan is within 40 feet of the remote for proper signal transmission.
Need help?
Do you have a question about the Molino and is the answer not in the manual?
Questions and answers
How to pair Molina fan & remote again. Fam remote doesn’t work. Batteries good, wall switch & breaker good.
To pair the MinkaAire Molino fan with its remote, follow these steps:
1. Turn off power to the fan at the circuit breaker.
2. Access the receiver by removing the fan canopy.
3. Check and set DIP switches on both the receiver and the remote to matching positions.
4. Turn the power back on.
5. Enter learning mode: Within 30 seconds of restoring power, press and hold the "Learn" button on the remote until the fan responds (usually a beep or movement).
6. Test the remote to confirm pairing.
Ensure the fan is within 40 feet of the remote for proper signal transmission.
This answer is automatically generated