Table of Contents
Advertisement
C
NOTE
•
Extra programs may vary according to
the specifications of your machine.
•
In order to receive better results from
drying machine programs, your laundry
should be washed with the appropriate
program in your washing machine and
wringed with recommended wringing
revolution..
•
Very little dampness might remain
on the shirts after the program. It is
recommended that you do not leave the
shirts in the drying machine
•
It is recommended to dry your delicates
in laundry bag to prevent wrinkles and
damage. When the program ends,
take your laundry out of the machine
immediately and hang them to prevent
wrinkles.
5.6 Auxiliary functions
Sound warning cancel
Drying machine makes sound warnings
when the program is completed. If you don't
want sound notifications, press the "Sound
Notification" button.
When you press the sound notification button
it lights up, and program does not make sound
notifications when completed.
C
NOTE
•
You can select this function before or
after the program starts.
5.7 Warning symbols
C
NOTE
•
Warning symbols may vary according to
the specifications of your machine.
Fiber filter cleaning
When the program is completed, a warning led
lights up, which indicates that the filter has to
be cleaned.
Dryer / User Manual
C
NOTE
•
If the filter cleaning led blinks, see the
„Troubleshooting" chapter.
Water tank
When the program is completed, a warning led
lights up, which indicates that the water tank
must be emptied.
If the water tank fills up while the program is
running, warning led starts blinking and the
machine goes into stand-by. In that case
empty the water in the water tank and start
the program by pressing the Start / Pause
button. Warning led turns off and the program
resumes.
Loading door open
Start/Pause led blinks when the loading door of
the drying machine is open.
5.8 End duration
You can delay the end duration of the program
for up to 24 hours with the end duration
function.
1.
Open the loading door and place your
laundry.
2.
Select the drying program.
3.
Press the end duration selection button
and set the delay duration you want.
End duration led lights up. (End duration
moves continuously when you keep
pressing the button).
4.
Press the Start / Pause button. End
duration countdown begins. The ":"
sign in the middle of the displayed delay
duration blinks.
C
NOTE
•
You can add or remove laundry for
the duration of the end duration. The
duration displayed on the screen is
the sum of the normal drying duration
and the end duration. At the end of the
countdown the end duration led turns off,
drying beings and drying led lights up.
15
Advertisement
Table of Contents
