GMC Silverado 2022 Manual page 241

Chevrolet/GMC Silverado/Sierra/Sierra Denali 2500 HD/3500 HD Owner
Manual (GMNA-Localizing-MidEast-16504136) - 2023 - CRC - 6/8/22
When road conditions allow you to safely
use it again, cruise control can be turned
back on.
Turning off the TCS or StabiliTrak/ESC
system will disengage the cruise control.
If the brakes are applied, cruise control
disengages.
: Press to turn cruise control on or off.
A white indicator comes on or off in the
instrument cluster.
+RES : If there is a set speed in memory,
press the control up briefly to resume to
that speed or press and hold to accelerate.
If cruise control is already engaged, use to
increase vehicle speed.
SET : Press the control down briefly to set
the speed and activate cruise control.
If cruise control is already engaged, use to
decrease vehicle speed.
: Press to disengage cruise control
without erasing the set speed from memory.
Setting Cruise Control
If is on when not in use, SET or +RES
could get pressed and go into cruise when
not desired. Keep off when cruise is not
being used.
1. Press to turn the cruise system on.
2. Get up to the desired speed.
3. Press and release SET .
4. Remove your foot from the accelerator.
The cruise control indicator on the
instrument cluster turns green after cruise
control has been set to the desired speed.
See Instrument Cluster 0 109.
Resuming a Set Speed
If the cruise control is set at a desired speed
and then the brakes are applied or
pressed, the cruise control is disengaged
without erasing the set speed from memory.
Driving and Operating
Once the vehicle reaches about 40 km/h
(25 mph) or more, press RES+ up briefly. The
vehicle returns to the previously set speed.
Increasing Speed While Using Cruise Control
Do one of the following:
Press and hold +RES up until the desired
speed is reached, then release it.
To increase vehicle speed in small
increments, press +RES up briefly. For
each press, the vehicle goes about 1 km/h
(1 mph) faster.
The speedometer reading can be displayed
in either English or metric units. See
Instrument Cluster 0 109. The increment
value used depends on the units displayed.
Reducing Speed While Using Cruise Control
Do one of the following:
Press and hold SET down until the
desired lower speed is reached, then
release it.
To slow down in small increments, press
SET down briefly. For each press, the
vehicle goes about 1 km/h (1 mph) slower.
is
The speedometer reading can be displayed
in either English or metric units. See
Instrument Cluster 0 109. The increment
value used depends on the units displayed.
241