GMC Silverado 2022 Manual page 232

Chevrolet/GMC Silverado/Sierra/Sierra Denali 2500 HD/3500 HD Owner
Manual (GMNA-Localizing-MidEast-16504136) - 2023 - CRC - 6/8/22
232 Driving and Operating
Caution
Do not drive on clean, dry pavement in
4 and 4 (if equipped) for an extended
period of time. These conditions may
cause premature wear on the vehicle s
powertrain.
Driving on clean, dry pavement in 4 or
4 may:
Cause a vibration to be felt in the
steering system.
Cause tires to wear faster.
Warning
If equipped with four-wheel drive, the
vehicle will be free to roll if the transfer
case is in N (Neutral), even when the shift
lever is in P (Park). You or someone else
could be seriously injured. Be sure the
transfer case is in a drive gear
or 4 or set the parking brake before
placing the transfer case in N (Neutral).
See Shifting Into Park 0 224.
Caution
Extended high-speed operation in 4
may damage or shorten the life of the
drivetrain.
An engagement noise and bump is normal
when shifting between 4 and 4 or
N (Neutral), with the engine running.
Shifting into 4 will turn Traction Control
and StabiliTrak/Electronic Stability Control
(ESC) off. See Traction Control/Electronic
Stability Control 0 237.
Automatic Transfer Case
Two-Speed Transfer Case
2 , 4 ,
If equipped, the transfer case controls are
used to shift into and out of four-wheel
drive.
To shift the transfer case, press the desired
button. The graphic in the instrument
cluster will flash while a shift is in progress.
The graphic displayed will change to indicate
the setting requested.
When the shift is complete the graphic will
stop flashing. The DIC message turns off
once the shift is complete. If the transfer
case cannot complete a shift request, it will
go back to its last chosen setting.
The settings are:
N (Neutral) : Use only when the vehicle
needs to be towed. See Transporting a
Disabled Vehicle 0 347.
2 (Two-Wheel Drive High) : Use for driving
on most streets and highways. The front
axle is not engaged. This setting provides
the best fuel economy.
AUTO (Automatic Four-Wheel Drive) : Use
when road surface conditions are variable.
When driving in AUTO, the front axle is
engaged, and the vehicle's power is sent to
the front and rear wheels automatically