Table of Contents
Advertisement
No.
Article Name
SYSTEM Drive
6
Status Indicator
7
SYSTEM Drive Tray
8
PSU Fan
9
Power Port
10
PSU Indicator
11
Console Port
12
RESET Button
1GbE RJ-45 LAN
13
Port
10GbE RJ-45 LAN
14
Port
15
Management Port
16
USB 3.0 Port
PCI Express
17
Expansion Slot
SAS OUT Port
18
(primary)
SAS OUT Port
19
(secondary)
1
For more information about Synology Expansion Unit supported by your Synology NAS, please visit www.synology.com.
5 Chapter 1: Before You Start
Location
Displays the status of drive. For more information, see "Other
LED Indicators".
Install Synology SATA SSD here.
Disposes of excess heat and cools the PSU.
Connect power cord here.
Displays the status of the power supply unit (PSU). For more
information, see "Other LED Indicators."
This port is used for manufacturing only.
1. Mode 1: Press and hold until you hear a beep sound to restore
the IP address, DNS server, and password for the admin
account to default.
2. Mode 2: Press and hold until you hear a beep, release the
button immediately, then press and hold again until you hear
three beeps to return the Synology NAS to "Not Installed"
status so that DiskStation Manager (DSM) can be reinstalled.
Rear
For detailed information on how to reset your Synology NAS,
please refer to
Connect RJ-45 network cable here.
Connect RJ-45 network cable here.
This port is used for out-of-band management only.
Connect external drives or other USB devices to the Synology
NAS here.
Supports the addition of PCIe network interface cards.
Connect to Synology Expansion Unit
Connect to Synology Expansion Unit
Description
this
article.
1
here.
1
here.
Advertisement
Table of Contents
